![]() ![]() ![]() You will notice cracks beginning to form very quickly and after around 5 minutes you will see your end result. You might want to choose a different colour for the surface layer for contrast mix a ratio of 40% paint to 60% Crackle Spirit Step 2. Once this underlayer is dry, you are then ready to apply the second layer of paint that will create the ‘pieces’ on the surface. Once the two are thoroughly mixed apply to your chosen surface with a brush or roller. To do this we recommend mixing 50% water-based or acrylic paint to 50% Crackle Spirit Step 1. How to use the 2 step systemīegin by mixing the Crackle Spirit Step 1 into your first paint colour which will be the ‘cracks’. Using Crackle Spirit is very easy and can be done in 2 ways – A 2 step system, and a 4 step system. Once the surface is dry, you are then ready to start. If this is the case you will first need to apply a coating of Absolute Primer. ![]() For larger cracks with a natural weathered antique finish, we recommend you use Antik Crackle Spirit.īefore you start your project you will need to check if the surface of your project is non-porous or if it has a shiny surface such as plastic, glass or stainless steel etc. The Owatrol Spirit range has two products to create decorative crackle paint effects on any surface.įor a small crackle, we suggest you use Crackle Spirit. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |